How to set up the suitcase TSA lock

How to set up the suitcase TSA lock

How to open/unlock your suitcase

Please match the dial to the 3-digit PIN code you set.

Please set the dial to the 3-digit PIN number you set.

(It is set to "0-0-0" when shipped from the factory. Please set it to "0-0-0" when opening it for the first time after purchase.)

Slide the slide button on the left side of the lock to the right.

The zipper pull will come out of the lock groove. Move the pull to the end and open the suitcase.

The zipper pull will come out of the lock groove. Move the handle all the way to the end and open the suitcase.

[Caution]

If you force the suitcase to open when the zipper is only partially open, the zipper may be damaged.

How to close and lock your suitcase

Check if the dial change button is pressed in.

Please check whether the dial change button is pressed in.

[Caution]

If the dial change button is left pressed in, the door will not lock even if you change the dial number. In this case, move the slide button so that the dial change button returns to its original position.
The number when the dial change button returns will be your PIN, so please check whether the number you set is correct.

Close the zipper of your suitcase and move the two pulls near the lock.

Close the zipper of your suitcase and move the two pulls close to the lock.

Align the zipper pull with the lock groove and insert firmly until you hear a click.

If the dial does not have the correct PIN number, you will not be able to insert the pull handle into the lock groove. Be careful not to pinch your fingers or damage your nails when operating.

If the handle is not inserted properly, or if the slide button is moved halfway after inserting the handle, the handle may not lock even after locking. Make sure to insert the pull handle securely.

If you rearrange the numbers on the dial, it will be locked and the slide button will not work.

If you rearrange the numbers on the dial, it will be locked and you will not be able to move the slide button.

How to set the PIN code

The factory setting is "0-0-0". Follow the steps below to change to another 3-digit number.

Turn the dial to the "current PIN" and release both the upper and lower locks.

Press the dial change button next to the dial using a pen tip, etc. The button will remain pressed in.

Press the dial change button next to the dial using the tip of a pen, etc. The button will remain pressed in.

[Caution]

If the dial does not have the correct PIN number, you will not be able to press the dial change button. Please be careful not to force it in as this may cause a malfunction.

Hold down the dial change button and set the dial to your favorite 3-digit number.

Move the slide button while being careful not to move the set dial number. The dial change button will return to its unpressed state. The setting is now complete.

Please move the slide button, being careful not to move the set dial number. The dial change button will return to its unpressed state. The set is now complete.

[Caution]

If you want to change your PIN, please repeat steps 1 to 4.
It is a good idea to write down the password you set in your passport or notebook in case you forget it.

TSA lock setting method

Push the reset button (small button) next to the dial all the way with a thin-tipped object.

Push the reset button (small button) next to the dial all the way in with a thin object.

Make sure that the reset button is pressed in and stops. If it does not stop, please use the

Make sure that the reset button is stuck in the pressed position. If it does not stop, please refer to the procedure for "Sliding type (with reset button 1)".

Choose your favorite 3-digit number and turn the dial to set it.

Slide the part with the keyhole sideways, and the reset button you pressed in step 1 will return to its original position, completing the setting.

Sliding type/with reset button 1 TSA lock setting method

[Before setting]

Match the dial to the unlock number (initial setting is "0-0-0"), slide the part with the keyhole to the side, and release the zipper pull from the lock

Press the reset button (small button) next to the dial all the way with a thin object.

Hold down the reset button, select your desired 3-digit number, and turn the dial to set it.

Hold down the reset button, select your favorite 3-digit number, and turn the dial to set it.

When you release the reset button and the button returns to its original position, the setting is complete.

Release your hand from the reset button and when the button returns to its original position, the setting is complete.

Q & A

If you forget your PIN code

Try in order from "0-0-0" to "9-9-9".
The dial change button is not a reset button. Please be careful not to press the button when the password is set to a number different from the current password, as this may cause a malfunction.
If your phone is unlocked during inspection by a TSA officer, you can usually use it without any problems. However, in rare cases, the keyhole may not return to its normal position.
In that case, insert a flat-tipped object such as a flathead screwdriver, turn it to the left or right, and return it to the correct position before use. The TSA lock cannot be used in this state.

[Caution]
Please be careful not to pinch your fingers or damage your nails when operating.
If the pull is not inserted sufficiently, or if the slide button is only moved halfway after the pull is inserted, the lock may not lock properly even after locking. Be sure to insert the pull handle firmly.